ATI AT 5000 Series Power Amplifiers
Please call for a demo of these fantastic sounding power amplifiers
note – these are not available to purchase online so please call for pricing and availability
ATI amplifiers are only available through authorised ATI registered dealers
AT50xx NC Series Power Class D Amplifiers
AMPLIFIER TECHNOLOGIES, INC. INTRODUCES NEW CLASS “D” AMPLIFIERS USING HYPEX N-CORE OUTPUT MODULES AND IN-HOUSE LINEAR POWER SUPPLIES AT52XNC: 200W RMS PER CHANNEL AT 8 OHMS WITH 2 TO 8 CHANNELS AT54XNC: 500W RMS PER CHANNEL AT 8 OHMS WITH 2 TO 4 CHANNELS
Montebello, CA , September 1, 2016 – Amplifier Technologies, Inc., the prolific manufacturer of many of the high end audio’s best amplifiers today added a new series of amplifiers. The AT5XXNC amplifiers use Hypex N-Core Class D output modules with ATI designed input buffers and linear power supplies and are available with two power configurations. The AT52XNC amps are rated at 200W RMS per channel at 8 ohms with 300W RMS at 4 ohms and are available with 2 to 8 channels. The AT54XNC amplifiers use two N-Core modules per channel in a differential bridged output configuration delivering 500W RMS per channel at 8 ohms and 900W RMS at 4 ohms. The AT54XNC amplifiers are available with 2, 3 or 4 channels.
These AT5XXNC series amplifiers break new ground in other ways. They are the first ATI amplifiers to use micro-processor control for turn-on delay and feature automatic AC power recognition and configuration. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure. The amplifiers also incorporate a new and novel “sleep” circuit. When the amplifier receives no input signal for a period of 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected on any channel, normal playback operation resumes instantaneously.
Per Morris Kessler, ATI’s president and chief engineer, “We are excited to offer amplifiers with ATI’s legendary high performance and reliability in designs that reduce amplifier weight by up to 50%.”
With rated distortion below 0.05% and signal-to-noise ratio of 123 dB (minimum, referenced to rated output), each amplifier in the series is capable of playing back the full dynamic range available on today’s lossless recordings.
All ATI AT5XXNC amplifiers are covered by ATI’s 7-year transferrable warranty and are available in standard (17”) chassis. A 19” rack-mount adapter is available
Analog Audio Inputs – One Single-ended (RCA) jack per channel; One Balanced (XLR) jack per channel
Input Impedance – 47 kΩ. Balanced for each phase
Input Sensitivity – 1.9V for 200W RMS, 8 ohms, 2.82V RMS input for 500W, 8 ohms
Gain – 27.8 dB
Polarity (Single-Ended) Non-Inverting Balanced; – Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output
Speaker Outputs Binding posts – 1 pair per channel
Modes /Process Standby – Amplifier is ready to be turned on via front panel switch or remote trigger. Overcurrent, D.C., and/or thermal protection: Amplifier will cycle. Catastrophic D.C. or output stage failure: Amplifier will shut down.
About Amplifier Technologies
Amplifier Technologies owns the ATI, Audioaccess, BGW and Theta Digital brands and designs and manufactures state-of-the-art audio components for its own and other brands in its facility in Montebello, CA. Guided by legendary amplifier designer Morris Kessler, ATI offers both performance and value in audio components.