skip to Main Content

JL Audio Fathom F110 V2


Rated 0 out of 5
(be the first to review)

Bring me a single 10″ driver’d sub to be beat the JL Audio Fathom F110 V2 if you can, nothing competes with its musicality, ability to stop/start and depth…… nothing

£3245 inc vat & delivery




The challenges associated with designing high-output, compact subwoofer systems can be daunting. In most cases, designers sacrifice low-frequency extension or output capability in order to keep a design acceptably small.

The Fathom® subwoofers sacrifice nothing, thanks to the dynamic advantages of their proprietary JL Audio drivers. These exceptional woofers allow for a true subwoofer passband and very high output, while keeping distortion well below audible thresholds. To extract full benefit from the excursion envelope of its woofer design, each Fathom® employs an uncommonly powerful switching amplifier with a large toroidal transformer and a patented circuit, designed to enhance control and fidelity.

The compact design and conventional form factor of the Fathoms apply beautifully to most home theater applications, including built-in designs. Front-mounted controls make them comfortable to set up and adjust, while JL Audio’s powerful DSP engine and exclusive Digital Automatic Room Optimization makes sure that response is smooth, even in challenging rooms.

As the smallest subwoofer in the Fathom® lineup, the f110v2 is ideal for smaller rooms and installations requiring an unobtrusive solution that delivers world-class low-frequency performance

Fathom® f110v2 Features:

Fathom® f110v2 Specifications:

Unbalanced Inputs: Stereo or Mono (two RCA jacks)

Enclosure Type: Sealed

Balanced Inputs: Stereo or Mono (two female XLR jacks)

Driver: Single 10-inch (nominal diameter)

Output To Slave: Balanced (one male XLR jack)

Frequency Response: (anechoic)27 – 111 Hz (±1.5dB)–3 dB at 25 Hz / 120 Hz–10 dB at 19 Hz / 155 Hz

Input Modes: Master or Slave

Level Modes: Reference (fixed gain) or Variable from full mute to +15 dB over reference gain

Effective Piston Area: 60 sq. in. (0.0387 sq. m)

Power Modes: Off, On or Automatic Signal-Sensing

Effective Displacement: 160 cu. in. (2.6 liters)

Light Modes: Off, On or Dim

Amplifier Power: 1.1 kW RMS short-term

Low Pass Filter Mode: Off, 12 dB per octave or 24 dB per octave

Dimensions* (H x W x D): 15.64 in. x 12.92 in. x 17.27 in.397 mm x 328 mm x 439 mm

Low Pass Filter Crossover Frequency: Variable from 30 Hz – 130 Hz

Net Weight:71 lbs. (32 kg)

Polarity: 0 or 180 degrees

Cabinet Finish: High-Gloss Black

Phase: Variable from 0 – 280 degrees, referenced to 80 Hz

Built in USAwith imported and domestic components

E.L.F. Trim: Variable from –12 dB to +3 dB at 25 Hz

Digital Automatic Room Optimization (D-ARO): 18-Band, with included, laboratory-grade calibration microphone, defeatable


There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Back To Top